THE ESSENCIALS AT A GLANCE
The 20G - Cockpit Mount can be adjusted in angle and length individually to the used bicycle computer and your field of view.
The distance from the Cockpit Mount to the stem bar can be adjusted in three length variants. Please take these dimensions into account especially if you use larger cycle computers and intend to fasten the Cockpit Mount on the lower screws of the stem bar.
The angle can be infinitely adjusted within a range of ± 20 °.
The curved carbon tubes allow a infinitely variation of the screw distance between
10 - 30mm.
The mounting-system allows a centered mounting in front of the handlebar.
The assembly is carried out by means of two high-strength, hollow-bored titanium screws. From the rear of the stem, two screws are passed through the bore and fasten the carbon tubes of the Cockpit Mount.
This type of handlebar mounting system is perfectly made for triathlon- and aerobars.
ATTENTION! FOR ASSEMBLY A STEM WITH A PASSAGE THREAD IS REQUIRED!
MATERIALS FROM AEROSPACE
For a perfect driving experience, the mounting system must withstand high loads. The Cockpit Mount is made from high quality materials, which are also used in the aerospace.
The stem screws consist of a high-strength and at the same time lightweight titanium alloy.
The tubes are made by hand out of carbon fibers.
Depending on the high loads occurring, the synthetic parts are reinforced with glass and carbon fibers.
MADE FOR YOUR BIKE COMPUTER
The Cockpit Mount has been specifically designed for the quarter turn mount of following bike computers.
Edge 1030, Edge 1000, Edge Explore 1000
Edge 820, Edge Explore 820
Edge 130, Edge 810, Edge 800, Edge 520 Plus Edge 510, Edge 500, Edge 200
Edge Touring, Edge 25, Edge 20
ROX 7.0, ROX 11.0, ROX 12.0
ELEMNT Mini, ELEMNT Bolt, ELEMNT
One MPH, One KPH